offshore services
About fifty per cent of our engineers have years of experience in the process design, process safety, operations within many types of oil and gas industries stretching from offshore, onshore through to refinery and beyond. We have the experienced engineers in the operations, design and safety of offshore systems.
Some of our offshore services include;
- Preliminary Studies/Feasibility studies
- Mass and Energy Estimation/Balances
- Front End Engineering Design (FEED)
- Capital Project Development Support
- Verification services for FEED
- Hydraulics modelling and Process simulation
- Process design packages with equipment specifications
- Safety Integrity Level (SIL)
- Selection analyses for Safety Instrumented Systems (SISs)
- Process Hazard Analyses (PHA)
- A Layer of Protection Analysis (LOPA)
- Compliance Audits
- Hazard assessments (including HAZOPs)
- Resolving/implementing PHA recommendations
- Developing PSM/RMP programs
- Developing process safety information
- PHA facilitation training
upstream oil and gas services
Unlike the complex processes of the refinery as compare to the individual process in the upstream oil and gas industries, the start-up/shutdown issues and the dynamics issues associated with the upstream industries are complex, particularly in remote sites. An in-depth understanding of these problems for start-up and shutdown manned and unmanned facilities and our team provides emergency control and overpressure protection, black start-ups, compressor train balancing and many other issues.
We provide an uncountable number of standard services in the upstream processor’s both for the offshore and onshore facilities. We can assist with issues the following areas of upstream processing:
1. Upstream Oil Processing
2. Gas Processing
3. NGL Processing and LPG Fractionation
UPSTREAM OIL PROCESSING SERVICES
- Oil/Gas Separation and Testing Separation
- Flaring reduction/elimination
- Hydrate prediction and prevention
- MEG/Corrosion Inhibitor Injection
- Glycol dehydration
- De-sanding
- Desalting
GAS PROCESSING SERVICES
- Slugcatcher specification
- Hydrate prediction and prevention
- Dehydration: MEG injection, silica gel, zeolite adsorption
- Amine absorption
- Dewpoint control unit
- Mercury removal unit
- Gas pipeline compression
- Flow metering
- Condensate stabilization
NGL PROCESSING AND LPG FRACTIONATION
- Merox treatment
- Benzene extraction
- Advanced column control
- Condensate stabilization
- iC5 rich extraction
lng services
LNG LIQUEFACTION AND REGASIFICATION
With regasification terminals, we provide equipment layout and basic cost estimation as part of preliminary design package, and key features such as BOG(boil-of-gas) suppression, reloading capability if needed), tank sizing, electrical minimization and water minimization will be part of the preliminary design package together with additional other process features required by the clients. Installations for liquefaction facilities are unique, and we provide commissioning support, operations support, debottlenecking, troubleshooting and many designs In the area of LNG receiving terminals, we can provide items such as major equipment lists, cost estimates, layout and assembly line items.
lng systems
Challenging compression and refrigeration systems are utilized for LNG facilities operations. Dynamic simulation(dynamic compression and evaluation programs) are in place to ensure that the systems are adequately protected and designed for a frequent start-up and shut down under a variety of load conditions. The following are some examples of common LNG subsystems:
WHAT WE CAN DO FOR OUR CLIENTS
- Documentation
- Procedures
- Layouts
- Design standards
- Cost estimates
- Process safety program support (PSM and RMP)
- Hazards identification (HAZOP)
- Electrical/civil/mechanical/process/piping interfacing
- Cause & effects
- Vendor interface
- SIL/SIS (for High Integrity Pressure Protection Systems)
- Alarm Rationalization
OUR LNG SERVICES
- Preliminary process design development
- Capital Project Development Support
- Front End Engineering Design packages (FEED) and verifications
- Preliminary and final process design packages
- Technical and economic process alternative evaluations and feasibility studies
- Design calculation and Specifications
- Technical reporting
- Process Modeling and Simulations
- Mass and energy balances
- Unit operation design/evaluation
- Debottlenecking studies
- Piping system hydraulics calculations
- Process control scheme development
- Process/equipment bid package preparation
- Control system start-up, tuning, optimization
- Process Flow Diagrams (PFDs
- Piping and Instrumentation Diagrams (P&IDs)
- Process Control Diagrams (PCDs)
- Equipment sizing and specifications, and vendor technical / cost proposal evaluation and recommendations
- Commissioning and start-up support
- Detail design and construction phase process support
- Conducting Process Hazard Analyses (PHAs)
- Developing risk management plans
- Process evaluation, troubleshooting and optimization
- On-site process modification/construction oversight
- Independent 3rd party design review
- Commissioning and start-up
- Development of process documentation
- Troubleshooting and optimization
- Development of operating procedures
PROCESS SYSTEMS SERVICES
- Wellheads
- Pipelines
- Slugcatchers
- Condensate separation
- N2 removal
- Benzene removal
- CO2 Absorption
- Driers
- Mercury absorption
- Pre-cooling
- Heavy hydrocarbon columns
- Liquefaction
- Sub-cooling
- CO2 liquefaction/re-injection
- LNG storage/loading
- LPG fractionation/storage
- Refrigerant makeup Utility Systems
- Mono-ethylene Glycol (MEG)
- Gas turbines and electrical (plus emergency power)
- Flares and blowdown
- Compressed air
- Steam
- Tempered water
- Cooling water
- Hot oil
- Nitrogen production
- Liquid Nitrogen storage
petroleum refining services
our refining position
EBL offers a wide range of engineering services to a petroleum refinery. We have a great deal of refinery unit operation, unit design, process safety, and troubleshooting experience.
We provide preliminary design packages, Mass and Heat Balances, process and equipment design, and any other engineering services as per the client’s request.
SERVICES WE RENDER
- Hydrotreating
- Crude Units
- Vacuum Distillation Units
- Isomerization
- Fluid Catalytic Cracking
- Reforming
- Coking
- and many more
ADDITIONAL SERVICES
- Capacity Evaluations
- Unit Debottlenecking
- Fractionation Upgrade Design
- Capital Project Development Support
- Unit Simulation and Modeling
- Balance of Process Design for New Technology Placement
- Energy Usage Improvements
- Flare Header Studies
- Relief Valve Sizing Validation
Here for you
Call us 24/7. We are there for your support
GPS Address
AK - 040-4605
Contact Details
Email Address: [email protected] +233200642591 +233202473696
Where to find us
119 Otumfo Osei Tutu II
Adjacent SSNIT Buidling
Kumasi - Ashanti Region
Ghana, West Africa